Precast edge holder is installed on the inside of the form work on prefabricated flat floor structures, to use as an attachment for edge protection.
• M12 c/c 120 mm.
Art. No. 911112
Precast attachments – overview
Precast edge holder 120 mm
Category: SR attachments
Precast socket
Precast socket that are already cast in a prefabricated lattice girder elements at the concrete factory, offers fast and safe mounting of edge protection. The Precast socket has an integrated post lock and is casted into the elements at the factory. Protection sleeve is mounted at the desired height at the working site, and is adapted to the casting height/slabs thickness. Post 1,3 m and Barrier 2,6 are installed either before or after that the prefabricated element is lifted in place. The Barriers can easily be lifted to the desired height when casting. No tools are needed. The products are tested in accordance with EN13374 and meet the dimensioning requirements according to the Euro Code.
Precast socket – Art. No. 911108
Protective sleeve for socket – Art. No. 911107
Precast attachments – overview
Wall bracket
Wall bracket is used for installing safety barriers, railings and Adjustable link bars in for example, window openings with low parapet, lift and shaft openings, etc. Using Wall brackets and Barriers can quickly and easily secure wall openings. Using this attachment there is no need for posts and attachment in the slab. The solution makes it simple and fast to open and close the edge protection. Casting is facilitated and one advantage is that repair of edge protection attachments are not required. This solution creates a tighter edge protection in comparison to using Adjustable link bars. It is quick and easy to install and uninstall when various kinds of work task are to be carried out.
• Hot dip galvanized.
• Weight 0,7 kg.
Art. No. 912121
Standing seam bracket
On roof base and cover with double seam the Standing seam bracket can be used as attachment for the edge protection. The bracket can be adjusted to four positions for roof inclinations from 5 to 40 degrees. The standing seam bracket is installed so that the seam lock gets a grip under the seam. The sheets must be of good quality and be fastened against the roof construction.
On roof bases the Standing seam bracket is installed above the roof frame with
wood screws.
• Installed on steel sheet, cover.
• Quick installation.
• Handles various roof angles.
• Does not damage the steel sheet.
• Hot dip galvanized.
• Weight 2,6 kg.
Art. No. 930103
Vertical bracket
The ordinary attachment for the balcony railing can be used to attach the Vertical bracket. In order to create a safer construction site the edge protection can be mounted before mounting the pre-manufactured balconies. After this, Post 1,3 m is installed together with safety barriers in order to adapt the edge protection according to the measurements of the balcony.
• Fits common balcony attachments.
• M10 c/c 100 mm.
• Two installation methods.
• Installed with cc up to 2,4 m.
• Hot dip galvanized.
• Weight 1,4 kg.
Art. No. 912118
Steel beam clamp
On steel beams with a flange a Steel beam clamp can be mounted in order to quickly create an attachment for temporary edge protection. Using steel beam as attachment creates a free surface on the slab and can be used for other work tasks. The safety barriers will then be positioned outside the working space. The clamp is designed so that is has jaws that grip the steel beam profile. The steel beam clamp has an integrated attachment for posts. Barriers are installed directly onto the post lock and its height can easily be adjusted in order to facilitate different work tasks.
• Grips steel beams and posts with flanges up to 300 mm.
• Integrated post bracket.
• Robust and durable thread.
• Hot dip galvanized.
• Weight 6,3 kg.
Art. No. 912209
Precast bracket
In constructions with prefabricated slab decks the Precast bracket can be installed onto slab edge formwork after that the attachment has been pre-designed. A dialogue takes place between the manufacturer of the prefabricated material and SafetyRespect’s technical division as to the edge protection solution and positioning of Precast brackets, etc. This bracket can be installed with safety barriers on any vertical surface and gives a free working space.
• Quick installation with keyhole.
• Hot dip galvanized.
• Weight 1,5 kg.
• 200 pieces delivered in stillage.
Art. No. 912119
Sheet piling bracket
This is a bracket for mounting edge protection on sheet piles up to 20 mm thickness. It is designed with integrated post lock and can be mounted with c/c up to 2,4 m.
• Hot dip galvanized.
• Weight 1,6 kg.
• EN13374 A, OSHA 1926.502 (B).
• Delivered 150 pcs in stackbable pallet.
Art. no. 912181
Side bracket 180 10 gr
Side bracket is installed on the form work as an attachment for edge protection. This version is an inclined bracket that facilitates installation of external panel wall. It is designed with an integrated post lock and is hot dip galvanized. Weight 0,6 kg.
Art. no. 912123
Side bracket 180
Side bracket is installed on the formwork as an attachment for edge protection. It is designed with an integrated post lock and is hot dip galvanized. Weight 0,6 kg.
Art. no. 912117