The VT Roof Attachment is designed to form an edge protection on sloping roof surfaces and is fixed to wooden beams. It can withstand dynamic loads.
• 1100009
• 3.0 kg
• EN 13374, class C
• Hot-dip galvanised (HDG)
• 350 x 50 x 220 mm
The Weld-on Attachment is welded directly onto the steel beam or steel structure and is used to hold an edge protection post.
• 5100021
• 0.3 kg
• EN 13374, class A
• blank
• 120 mm
The VT Steelweb 425 is designed to connect through a steel beam or onto a vertical surface. The post is adjustable in off set up to 400 mm.
• 5040041
• 3.9 kg
• EN 13374 – ABC
• hot-dip galvanised (HDG)
• 418 x 425 x 155 mm
The VT Steelflange is used to hold an edge protection post on steel beams without having to drill for it. This clamp allows clamping widths of 80-460 mm.
• 5040007
• 3.8 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 730 x 240 cm
The VT Sheet Pile Clamp is placed on sheet pile profiles or trench sheets from 5-15 mm and fastened. It is easy to install thanks to the integrated DW15 nut and the locking thread.
• 1100002
• 1.4 kg
• EN 13374, class A
• electrogalvanised
• 175 x 112 mm
The VT Foot is used to hold an edge protection post on all flat surfaces, e.g. in-situ concrete ceilings. This horizontal attachment can be fastened with various screws and anchors.
• 5040001
• 1.1 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 195 x 130 mm
The VT Edge 100 is mainly used to reliably secure the edges of stairs. The cantilever of the post to be used is 100 mm and therefore enables work to be carried out safely on the stairs.
• 5040005
• 1.7 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 300 x 140 mm
Clamping widths of 50-600 mm and easy to adjust by hand and with a hammer. The clamp has three options for holding posts.
• 5040021
• 5.8 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 730 x 240 mm
This clamp is used to attach standard edge protection to sheet pile profiles, trench shoring panels and HEB beams. Clamping width up to 150 mm and easy to mount. Tightening using a hammer.
• 5040034
• 4.8 kg
• EN 13374, class A
• galvanized
• 330 x 249 x 180 mm
The VT Balcony can be mounted directly on the brickwork or on the balcony and is used to hold an edge protection post. The two attachment points prevent the post holder from swinging out in any situation.
• 5040023
• 1.4 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 200 x 120 mm
