A working method has been developed in which we are involved as early as the design stage in developing solutions in accordance with an established methodology – an edge protection analysis. We identify situations where there might be a risk of falling, and solutions are then specified at the design stage. We cooperate with the project management, designers and local managers to create safe workplaces.
Clamp 550 can be used as a bracket for temporary edge protection on stairs and slab edges. By using this clamp the process of making holes is eliminated when installing edge protections. The clamp can be swivelled and turned around and be installed in one simple operation without damaging the sensitive surface. The clamp has an integrated bracket for Post 1,3 m and Adjustable link bars are installed on the posts.
• Width span 25 – 550 mm.
• Several installation alternatives.
• Swivelling 360 deg. and reversible.
• Handles all stair angles.
• Hot dip galvanized.
• Weight 7,8 kg.
• 30 pieces delivered in stacking box stillage.
Art. No. 912220
With a structure framework cast-in-site there is the possibility of designing attachment points for the edge protection. Socket with rebar and integrated post lock, for example, can be cast into the wall tops in, for instance, house gables, lift- and stair shafts. After this posts and safety barriers are installed.
• For building structures cast in place.
• Integrated post lock.
• Length of reinforcement 400 mm.
• Delivered with plastic lid.
Art. No. 911114
The Precast socket wall is designed and cast into the wall element at the factory. This solution creates fast mounting of safety barriers and offers a free working space. Can also be used for casting in other prefabricated concrete constructions, to create attachments for edge protection in the outer slab edge.
• Length 450 mm.
• Integrated post lock.
• Delivered with plastic cover.
• Weight 1,8 kg.
Art. No. 911200
Precast attachments – overview
Precast edge holder is installed on the inside of the form work on prefabricated flat floor structures, to use as an attachment for edge protection.
• M12 c/c 120 mm.
Art. No. 911112
Precast attachments – overview
Precast socket that are already cast in a prefabricated lattice girder elements at the concrete factory, offers fast and safe mounting of edge protection. The Precast socket has an integrated post lock and is casted into the elements at the factory. Protection sleeve is mounted at the desired height at the working site, and is adapted to the casting height/slabs thickness. Post 1,3 m and Barrier 2,6 are installed either before or after that the prefabricated element is lifted in place. The Barriers can easily be lifted to the desired height when casting. No tools are needed. The products are tested in accordance with EN13374 and meet the dimensioning requirements according to the Euro Code.
Precast socket – Art. No. 911108
Protective sleeve for socket – Art. No. 911107
Precast attachments – overview
Wall bracket is used for installing safety barriers, railings and Adjustable link bars in for example, window openings with low parapet, lift and shaft openings, etc. Using Wall brackets and Barriers can quickly and easily secure wall openings. Using this attachment there is no need for posts and attachment in the slab. The solution makes it simple and fast to open and close the edge protection. Casting is facilitated and one advantage is that repair of edge protection attachments are not required. This solution creates a tighter edge protection in comparison to using Adjustable link bars. It is quick and easy to install and uninstall when various kinds of work task are to be carried out.
• Hot dip galvanized.
• Weight 0,7 kg.
Art. No. 912121
On roof base and cover with double seam the Standing seam bracket can be used as attachment for the edge protection. The bracket can be adjusted to four positions for roof inclinations from 5 to 40 degrees. The standing seam bracket is installed so that the seam lock gets a grip under the seam. The sheets must be of good quality and be fastened against the roof construction.
On roof bases the Standing seam bracket is installed above the roof frame with
wood screws.
• Installed on steel sheet, cover.
• Quick installation.
• Handles various roof angles.
• Does not damage the steel sheet.
• Hot dip galvanized.
• Weight 2,6 kg.
Art. No. 930103
The ordinary attachment for the balcony railing can be used to attach the Vertical bracket. In order to create a safer construction site the edge protection can be mounted before mounting the pre-manufactured balconies. After this, Post 1,3 m is installed together with safety barriers in order to adapt the edge protection according to the measurements of the balcony.
• Fits common balcony attachments.
• M10 c/c 100 mm.
• Two installation methods.
• Installed with cc up to 2,4 m.
• Hot dip galvanized.
• Weight 1,4 kg.
Art. No. 912118
On steel beams with a flange a Steel beam clamp can be mounted in order to quickly create an attachment for temporary edge protection. Using steel beam as attachment creates a free surface on the slab and can be used for other work tasks. The safety barriers will then be positioned outside the working space. The clamp is designed so that is has jaws that grip the steel beam profile. The steel beam clamp has an integrated attachment for posts. Barriers are installed directly onto the post lock and its height can easily be adjusted in order to facilitate different work tasks.
• Grips steel beams and posts with flanges up to 300 mm.
• Integrated post bracket.
• Robust and durable thread.
• Hot dip galvanized.
• Weight 6,3 kg.
Art. No. 912209
