Tag: beam

hall system attachment fall protection steel

Attachments for concrete, steel and wood

hall system attachment fall protection steel

The Hall system offers several attachment alternatives that can be used for steel, concrete and glued laminated timber. The attachment is carried out either in the middle of or on the side of the beam, between two columns placed close to each other, direct in wooden beams or with casting sleeves. The brackets can be fastened either with bolts if they are to be removed at a later date, or be welded in place as permanent brackets to be used for future maintenance of roofs and facades.

PRODUCTS
• Weld nut
• Rod 20
• Pre-cast attachments

hall system attachment fall protection concrete

hall system fall protection attachment

Flex working platform

When working on facades and roofs Flex working platform can be installed to create a safe working area. The system is both faster to install and more flexible than traditional scaffolds. The system can be adapted to most situations. Installation is mainly done by SafetyRespect in consultation with the customer.

The working platform has a type approval certificate as a scaffold issued by SP (Technical Research Institute of Sweden) in load class 2 and 3 according to AFS 1990:12.

• Flexible installation on wall, floor structure or truss.
• Used with boardwalk steel sheet.
• Configured according to requirement.
• Hot galvanized components.
• Load classification 2 and 3.
• Console weight from 12 kg.

Art. No. 981122

Product sheet

SafetyRespect Flex working platform

Working platform with fall protection

SafetyRespect Flex working platform

SafetyRespect Flex working platform

Working platform with fall protection

flex_working_platform_safetyrespect_0647

flex_working_platform_safetyrespect_0673x

 

Flex facade bracket

Flex facade bracket

Flex facade bracket

In order to create a free working space on facades Flex facade brackets can be used as attachments for temporary edge protection. The attachment itself is designed in order to facilitate installation of edge protections. The distance between the facade and edge protection can easily be adjusted during ongoing work. Flex Facade bracket is available in three different lengths to suit most situations and if the attachments are projected early in the process, the assembly goes quickly and smoothly with high safety. For more specific needs, special configurations of Flex working platform can be the solution that provides good fall protection without being in the way of work near the edge of the work surface.

• Adjustable 50 – 550 mm from the facade.
• Keyhole bracket.
• Installed with c/c up to 2,4 m.
• Hot dip galvanized.
• Weight 6,8 kg.

FLEX FACADE BRACKET 280
Art. no. 914043

FLEX FACADE BRACKET 400
Art. no. 914118

FLEX FACADE BRACKET 600
Art. no. 914119

Product sheet

Flex facade bracket - Fall protection roof on constructon site

Kollektiivinen putoamissuojaus - SafetyRespect

Temporary edge protection on facade

flex_facade_bracket_safetyrespect_9736

Flex eave bracket

Flex eave bracket

Flex eave bracket

At roof eaves, Flex eave bracket can be installed as an attachment for edge protection. This solution enables a free working space and the distance between the facade and edge protection can be adjusted during ongoing work. The bracket is installed with a through bolt in the roof frame and supports even against the facade or the roof frame.

• Adjustable bracket.
• Configured according to requirement.
• Robust and durable.
• Galvanised components.
• Weight from 5,1 kg.

Art. No. 914123

Product sheet

flex_eave_bracket_safetyrespect_2

flex_eave_bracket_safetyrespect_9820

Flex roof gable bracket

Flex roof gable bracket

Flex roof gable bracket

At roof gables the Flex gable bracket can be installed as an attachment for temporary safety barriers, which creates a free working area. The distance between the facade and the edge protection can be adjusted during ongoing work. The attachment can be done in the roof base.

• Adjustable bracket.
• Configured according to requirement.
• Robust and durable.
• Galvanised components.
• Weight from 5,1 kg.

Art. No. 914124

Product sheet

flex_roof_gable_bracket_safetyrespect_9822

flex_eave_bracket_safetyrespect_9820

 

Flex eave bracket with counterhold_safetyrespect_new

Flex eave bracket with counterhold

Flex eave bracket with counterhold_safetyrespect_new

At roof eaves Flex eave brackets with counterhold can be installed as an attachment for temporary edge protection. The attachment makes possible a free working space and the distance between the facade and edge protection can be adjusted during ongoing work. The bracket is installed with through bolt in the roof frame and supports even against the facade or the roof frame.

• Adjustable bracket.
• Configured according to requirement.
• Robust and durable.
• Galvanised components.
• Weight from 5,1 kg.

Art. No. 914125

Product sheet

flex_eave_bracket_w_counterhold

Edge protection at eaves

Edge protection at eaves

Clamp for edge protection on steel structure

Clamps on steel beams

Clamp for edge protection on steel structure

On steel beams with a flange a Steel beam clamp can be installed in order to quickly create an attachment for the edge protection. This creates a free surface on the slab that can be used for other work tasks. The clamp is designed with gripping jaws for the steel beam profile. The steel beam clamp has an integrated attachment for the post. Barrier 2,6 is installed directly onto the post lock and its height can easily be adjusted in order to facilitate different work tasks.

PRODUCTS
• Steel beam clamp

• Post 1,5 m alu
• Barrier bracket wedge coupler
• Barrier 1,3, 1,95, 2,6

steel_beam_clamp_safetyrespect_5399

steel_beam_clamp_safetyrespect_5412steel_beam_clamp_safetyrespect_1

Beam bracket wood

Beam bracket wood is used for installing collective fall protection on wooden beams in form systems at vaults cast in site. The bracket is installed together with posts and barriers.

• Integrated post lock.
• Hot dip galvanized.
• Quick screw lock.
• Weight 4,0 kg, 2,3 kg.

PRIMARY – Art. No. 912168
SECONDARY – Art. No. 912169

Product sheet

Coupler 48-50

Coupler 48-50 is used as a bracket for installing edge protection on construction sites. One end on the bracket fits SafetyRespect’s different posts and aluminium pipes and most of the common scaffold brands. The other end fits Flex Beam 50 mm and Alu Beam 50 mm.

Art. No. 915104