Barrier to use as collective fall protection on building sites.
• Can be easily raised and lowered on the posts.
• Zinced and powder coated.
• Stable frame construction.
• Integrated toe board 260 mm.
• Weight 19,7 kg.
• 35 pieces delivered in stacking stillage.
Art. No. 913111
Slab edges are present everywhere on construction sites and are an usual cause of fall accidents. Socket base can be installed as attachment for edge protection on the slab edge, stairs and other situations where there is a risk of falling. Our solution can be installed on all types of material and they are very fast and flexible as, for example, when walls are to be installed. When the safety barrier is in its lowest position it seals against the slab, and it can easily be raised on the post for various kinds of work at the slab edge.
• Integrated post lock.
• Several bolt alternatives.
• Hot dip galvanized.
• Weight 1,0 kg.
• 150 pieces delivered in stacking box stillage.
Art. No. 912110
In order to create a safe working site and save time the edge protection can be installed on prefabricated elements before they are lifted in place. For example, attachments, Post 1,3 m and Barrier 2,6 can be installed already on the lorry on which the prefabricated elements are transported or on the ground before hoisting them in place. The edge protection will then be in place already when the next working phase is to be started on the building. Installation is fast and safe, and creates better economy through more efficient use of the cranes.
PRODUCTS
• Socket base
• Vertical bracket
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
In building constructions with wooden beams and columns the edge protection can be mounted with various systems and solutions, for example with Flex facade brackets. The facade bracket is directly mounted on a wooden beam with the required wood screws. When a roof protection is required, a Hall system can be installed in the wood structure. The attachment is then done by using rods.
PRODUCTS
• Facade bracket
• Hall system
• Wood screw
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
When steel beams are used in the building construction a Welding socket with integrated post lock should be designed as an attachment of edge protection. In these cases the Welding socket is welded according to the instructions when producing the steel beams. When the beam has been lifted in place Post 1,3 m and Barrier 2,6 are mounted. The attachment of the edge protection will become both safer and faster with a pre-fabricated attachment such as this one.
PRODUCTS
• Welding socket
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6
Barrier to use as collective edge protection on construction sites.
• Can be easily raised and lowered on the posts.
• Zinc plated and powder coated.
• Stable frame construction.
• Integrated toe board 260 mm.
• Weight 10,8 kg.
• 46 pieces delivered in stacking stillage.
Art. No. 913121
Barrier to use as temporary edge protection on construction sites.
• Can be easily raised and lowered on the posts.
• Zinced and powder coated.
• Stable frame construction.
• Integrated toe board 260 mm.
• Weight 15,1 kg.
• 46 pieces delivered in stacking stillage.
Art. No. 913131
On roof covers with double seam like tin plated roofs, the Standing seam bracket can be used as attachment for the collective fall protection. The bracket can be adjusted to four positions for roof inclinations from 5 to 40 degrees. The Standing seam bracket is installed so that the seam lock gets a grip under the seam. The sheets must be of good quality and be well fastened against the roof construction. On roof bases the Standing seam bracket is installed above the roof frame with wood screws.
PRODUCTS
• Standing seam bracket
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
On roof base and cover with double seam the Standing seam bracket can be used as attachment for the temporary edge protection. The bracket can be adjusted to four positions for roof inclinations from 5 to 40 degrees. The Standing seam bracket is installed so that the seam lock gets a grip under the seam. The sheets must be of good quality and be well fastened against the roof construction. On roof bases the Standing seam bracket is installed above the roof frame with wood screws.
PRODUCTS
• Standing seam bracket
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
In order to create a free working space on roofs Flex facade bracket can be used as an attachment of edge protection. The distance between the facade and collective edge protection can easily be adjusted during ongoing work. Flex facade bracket is available in three different lengths to suit most situations and if the attachments are projected early in the process, the installation is quick and smooth, with high safety. Flex working platform can also be a solution that provides good protection without being in the way of work near the edge of the work surface.
PRODUCTS
• Flex Facade bracket
• Flex working platform
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6
Product sheet
