Tag: concrete

Installation of floor structures

blocking_safetyrespect_7073c

When installing prefabricated concrete slabs a movable edge protection is required for safe blockage for other construction personnel. For this the Ground support plate is used together with Socket base, Post 1,3 m and Barrier 2,6. The Barriers then work as effective and safe blockage while the installation of prefabricated concrete slabs is carried out by workers with personal fall protection equipment.

PRODUCTS
• Ground support plate
• Socket base
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Personal fall protection equipment

blocking_safetyrespect_5548

blocking_safetyrespect_7073

Prefabricated concrete slabs

prefab_safetyrespect_9368c

When prefabricated concrete slabs are used in building constructions Socket base is usually installed at the slab edge for attachment of edge protection. In the Socket base Post 1,3 m is installed and thereafter Barrier 2,6. The Barrier can be raised in one simple operation on the post up to a height of 310 mm above the floor structure, without decreased safety. This creates conditions for joint grouting, casting and other common work tasks without any need of uninstalling the edge protection.

PRODUCTS
• Socket base
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Cast protection for Socket base

standard_system_0119

standard_system_safetyrespect_0114c

standard_system_safetyrespect_0136c

Edge protection precast walls

Wall elements with sockets cast into the top

precast_socket_wall_safetyrespect_6922c

The Precast socket wall is an attachment that is designed and cast into the wall element at the factory. This solution creates fast installation of the temporary edge protection and offers a free working space.

PRODUCTS
• Precast socket wall
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6

precast_socket_wall_safetyrespect_6930

precast_socket_wall_safetyrespect

Cast in socket M16 for edge protection

Wall elements with sockets cast into the facade

Cast in socket M16 for edge protection

Cast in socket M16 is an attachment that is designed in a wall element that enables fast and safe installation of collective fall protection on the facade. A dialogue takes place between the manufacturer of the prefabricated material and SafetyRespect’s technical division as to recommendations of edge protection solutions, positioning of cast in sockets, pull out loads, laws and regulations.

PRODUCTS
• Cast in socket M16
• Recommended bracket
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6

Facade bracket for edge protection

cast_in_socket_m16_safetyrespect

Working platform with edge protection

Edge protection for prefabricated material

balconies_safetyrespect_6856

Edge protection solutions that are planned in consultation with both the product management and designers create the best conditions regarding economy, time and safety. Already at the designing stage we investigate things such as attachments for the edge protection in order to find solutions to the work tasks that are to be carried out by the different professional groups of people or subcontractors.

Prefabricated attachment for edge protection

Edge protection precast walls

Safety fan SafetyRespect

Safety fan on slab edges

Safety fan SafetyRespect

SafetyRespect Safety fan system for slabs is a compliment to our edge protection system and is used to catch falling material and objects (not people) that may constitute a risk for injuries to people and damage to objects. This system can be installed without any need of cranes and designed to be installed on floor structures, with the possibility of directly integrating SafetyRespect’s edge protection system.

PRODUCTS
• Top bracket
• Bottom support
• Alu beam 1500
• Alu pipe 6 m
• Net safety fan 3 x 6 m
• Double coupler swivelling
• Coupler 48-50
• Plate 140×140
safety_fan_slab_safetyrespect_1

Impact anchor and M16

attachment_anchor_type_m16_safetyrespect_2

Impact anchor M16
Art. no. 919110

Double-threaded M16
Art. no. 919111

Concrete screw

concrete_screw_2

Hilti HUS3-H 10×90
Art. no. 2079914

Hilti HUS3-H 10×150
Art. no. 2079918

Hilti HUS V 10×95
Art. no. 2079943

Hilti HUS V 10×105
Art. no. 2079944

Concrete casting in site

Casting in site

Concrete casting in site

With a structure framework cast-in-site there is the possibility of designing attachment points for the edge protection. Socket w rebar with integrated post lock, for example, can be cast into the wall tops in, for instance, house gables, lift- and stair shafts. After this Post 1,3 m and Barrier are installed. Vertical brackets can be installed on the formwork as attachments, followed by Post 1,3 m and Barrier.

In order to be able to build external panel walls from inside the slab Balcony bracket 10 degrees can be installed as an attachment, which gives an inclination of the edge protection by approximately 10 degrees. For other requirements of edge protection such as stairs, window openings, etc., there are several solutions that can be designed and cast in order to facilitate installation of edge protection and to create safer working sites.

PRODUCTS
• Socket w rebar
• Balcony bracket 10 degrees
• Balcony bracket
• Vertical bracket
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6

casting_in_site_safetyrespect_04

socket_w_rebar_safetyrespect_0203

At the wall tops Socket W Rebar, with integrated post lock can be cast as attachments for edge protection.

Concrete casting on slab structures

When casting on top of concrete slab structures where Socket base, Post and Barrier are used on the slab it is an advantage to use casting protection. The Barrier can be raised on the post in several steps up to 310 mm with maintained safety as the post locking is fully functional. The Cast protection protects the Socket base against concrete scrap from the casting process.

PRODUCTS
• Socket base
• Post 1,3 m
• Cast protection for Socket base
• Barrier 1,3, 1,95, 2,6

cast_protection_safetyrespect_2cast_protection_safetyrespect_1