Tag: construction

Positioning kit SafetyRespect

Positioning kit

Positioning kit SafetyRespect
When you need to carry out several different kinds of work at height, such as work on a roof or scaffolding, your equipment must be flexible, comfortable and safe.

If you work hanging outside the construction, the demands on your equipment are slightly different. Then it is mainly a question of locking yourself safely and securely and in the right position.

Our positioning kit includes a well-fitting harness with padding on the waist belt and around the legs. The harness can be adjusted over the shoulders and around the waist and legs. You lock yourself securely with a pair of sturdy ladder hooks with attached fall arresters. The kit also comes with an easy-to-use site lanyard. The products are supplied in a sturdy, water-resistant bag that can be carried on the back.

POSITIONING KIT
Art. no. 967320
Harness SR Technic
Positioning line “Site” 2 m with Locker lock
Carabiner alu, oval 26 kN ozone black triplock
Absorber reactor 140 EYE Y 155 cm + 2xK35
Gear bag 35 l SR

Product sheet

construction kit SafetyRespect

mobile platform kit safetyrespect

Installation of floor structures

blocking_safetyrespect_7073c

When installing prefabricated concrete slabs a movable edge protection is required for safe blockage for other construction personnel. For this the Ground support plate is used together with Socket base, Post 1,3 m and Barrier 2,6. The Barriers then work as effective and safe blockage while the installation of prefabricated concrete slabs is carried out by workers with personal fall protection equipment.

PRODUCTS
• Ground support plate
• Socket base
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Personal fall protection equipment

blocking_safetyrespect_5548

blocking_safetyrespect_7073

Prefabricated concrete slabs

prefab_safetyrespect_9368c

When prefabricated concrete slabs are used in building constructions Socket base is usually installed at the slab edge for attachment of edge protection. In the Socket base Post 1,3 m is installed and thereafter Barrier 2,6. The Barrier can be raised in one simple operation on the post up to a height of 310 mm above the floor structure, without decreased safety. This creates conditions for joint grouting, casting and other common work tasks without any need of uninstalling the edge protection.

PRODUCTS
• Socket base
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Cast protection for Socket base

standard_system_0119

standard_system_safetyrespect_0114c

standard_system_safetyrespect_0136c

Edge protection stairs

Attachment to the string

stairs_safetyrespect_p6300013c

As an attachment point for the bracket the regular cast in sockets in stairs can be used. A Stair bracket with spacers makes it possible to let the protection in the stairs during the whole construction period. All kinds of work can be carried out with the protection in place, even the final painting.

PRODUCTS
• Stair bracket
• Post 1,3 m
• Adjustable link bar
• Barrier bracket 360

stair_bracket_safetyrespect_0051x

stair_bracket_safetyrespect_0052x

Edge protection on eaves

Eaves

Edge protection on eaves

At the eaves, Flex eave bracket can be installed as an attachment for temporary edge protection. This solution enables a free working space and the distance between the facade and edge protection can be adjusted during ongoing work. The bracket is installed with a through bolt in the roof frame and supports even against the facade or the roof frame.

PRODUCTS
• Flex eave bracket
• Flex eave bracket with counterhold
• Flex working platform
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6

flex_eave_bracket_safetyrespect_2

flex_eave_bracket_w_counterhold

Fall protection on house facade

Facades

Fall protection on house facade

In order to create a free working space on roofs Flex facade bracket can be used as an attachment of edge protection. The distance between the facade and collective edge protection can easily be adjusted during ongoing work. Flex facade bracket is available in three different lengths to suit most situations and if the attachments are projected early in the process, the installation is quick and smooth, with high safety. Flex working platform can also be a solution that provides good protection without being in the way of work near the edge of the work surface.

PRODUCTS
• Flex Facade bracket
• Flex working platform
• Post 1,3 m
• Post 1,5 m alu
• Barrier 1,3, 1,95, 2,6

Fall protection on house facade

Working platform with fall protection

SafetyRespect Flex working platform

SafetyRespect Flex working platform

Working platform with fall protection

Edge protection floor opening

Floor openings

openings_safetyrespect_069

Openings in slabs and shafts are sometimes changed and must be secured against falls during the construction process. Floor openings should be considered as an open slab edge and be secured with collective fall protection. For this you can use an attachment such as Socket base or Vertical bracket, and Post 1,3 m and Barriers. Barrier bracket 360 should be mounted in the corners as an attachment for Barriers in all directions.

PRODUCTS
• Socket base
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Barrier bracket 360

openings_safetyrespect_066

Safety fan on walls

safety_fan_wall_safetyrespect_6843c

SafetyRespect Safety fan system for walls is a complement to our edge protection system and is used to catch falling material and objects (not people) that may constitute a risk for injuries to people and damage to objects. This system is adapted to be installed on a vertical surface without any need of cranes and with the edge protection mounted freestanding on the working area.

PRODUCTS
• Alu beam 1500
• Alu pipe 6 m
• Net safety fan 3 x 6 m
• Double coupler swivelling
• Coupler 48-50
• Plate 140×140
• Coupler bracket
• Keyhole bracket

safety_fan_wall_safetyrespect_6830

safety_fan_wall_safetyrespect_1596c

safety_fan_wall_safetyrespect_6843

safety_fan_scaffolding_safetyrespect_30026safety_fan_wall_safetyrespect_1

Stair tower edge protection

Stair towers and building hoists

Stair tower edge protection

It is important to create access to slabs at the working site in connections between building hoists and stair towers. SafetyRespect’s products are compatible with most common scaffold brands and stair towers.

PRODUCTS
• Barrier bracket wedge coupler
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6
• Adjustable link bar
• Double coupler swivelling

Building hoist, stair tower and edge protection

Building hoist and edge protection

elevator_safetyrespect_5175c

elevator_safetyrespect_5175cc

stair_towers_safetyrespect_5209x

Guard rail system

Blocking and temporary enclosures

Guard rail system

SafetyRespect’s Guard rail system is a stable and fast-mounted system for blocking and temporary enclosures, designed to meet demanding environments. The Guard rail system is available in three variants, Guard rail, Barrier and Fence, all in different lengths. They can easily be connected by integrated hooks and loops, and set at different angles.

The system consists of several interchangeable parts such as three models of ground support and a toe board holder. Completion can be done retrospectively to accommodate specific needs.

The Guard rail system can be used as temporary blocking in traffic environments, on construction sites and at events etc. The system is designed for ergonomic and cost-effective handling. It can also be equipped with reflexes for increased visibility.

The products are available as hot dip galvanized, and galvanized and powder coated. We also offer custom profiling with powder coating in desired color and logotype.

PRODUCTS
• Guard rail 1,8 m, 2,5 m, 3,2 m
• Barrier 1,8 m, 2,5 m, 3,2 m
• Fence 1,8 m, 2,5 m, 3,2 m
• Flat foot
• Angle foot
• Block foot
• Toe board holder
• Ground support plate
• Socket base
• Post 1,3 m
• Barrier 1,3, 1,95, 2,6

Guard rail system

Guard rails

Guard rail system

blocking_safetyrespect_7073c

blocking_safetyrespect_tuzla_22